Go to content

Guide - Chemical protection gloves

Use our chemical protection guide or contact one of our sellers and get help in finding a suitable glove for protection against the relevant chemical mix.

If you handle oils and chemicals without protecting your hands, you’re exposing yourself to risks not only to skin damage but also to damage to your nervous system and vital organs. You also risk developing skin irritation, oversensitivity and corrosion damage because of the chemicals. Always use our chemical protection guide or consult with our sellers when choosing gloves.

All Ejendals’ chemical gloves are tested and approved according to EN 374, chemical and microorganism risks. Chemical protection gloves are intended for single-day use, and sometimes for even shorter periods.

ADVICE US ABOUT WHAT GLOVE SUITS YOUR NEEDS

Always use our chemical protection guide, consult with our sellers, or send a request to cs.support@ejendals.com when choosing gloves.

THINGS TO CONSIDER WHEN CHOOSING CHEMICAL PROTECTION GLOVES

  • A glove that gives good protection against a certain individual chemical may give very poor protection against others or a mixture of chemicals.
  • As a rule, chemical protection gloves are intended for single-day use. They must not be re-used.
  • A used glove is chemically contaminated and there is a risk that the skin will be exposed to harmful substances when it is handled.
  • Higher temperatures shorten the time it takes for the chemical to break through.
  • Thicker materials generally mean longer breakthrough times (BTT).
  • At Ejendals, for gloves consisting of multiple layers (liner etc), we denote the effective thickness of the chemical protection layer with an asterisk (*). It is this thickness we use in our estimations of BTT for a certain combination of glove model and chemical.
  • Once a chemical has been absorbed, it continues to break through (permeate) the protective glove.
  • Permeation through a protective glove takes place at the molecular level and is therefore not visible to the naked eye.
  • Even the best gloves lose their protective properties if they are mechanically damaged or if the chemical has broken through the material.
  • Strongly corrosive chemicals can destroy the glove material by breaking it down before the specified breakthrough time.

PERMEATION is a process whereby the chemical is absorbed into and passes through the glove material at a molecular level.

PENETRATION involves the chemical moving through pinholes and other imperfections in the glove material.

DEGRADATION is when the glove material’s physical resistance deteriorates under the influence of a chemical.

MIXING CHEMICALS CAN HAVE UNEXPECTED RESULTS

Two chemicals with known characteristics can produce unexpected effects when mixed. Since the number of chemicals marketed is huge, it is virtually impossible to test all conceivable combinations of them. Models do exist for estimating combined effects on the basis of what is known about the component chemicals. However, they presuppose that data is available and that the various chemicals involved have the same mechanisms of action. This means that the models can only be used for groups of chemicals that act in a similar way – not for the complex mix of chemicals that we are exposed to in reality.

BREAK-THROUGH-TIMES (BTT) FOR A SELECTION OF COMMON CHEMICALS

Break-through-time (BTT) is the time when a chemical is considered to have permeated (passed through) a material. It depends primarily on the material and secondarily on the thickness (and other factors). All data refer to full contact with the chemicals at room temperature, and need to be adjusted for actual conditions and additional risks. The BTT data in this chemical protection guide originate from combined data from laboratory tests and our internal database. The BTT values are calculated from best-fit to experimental points and rounded downwards to closest EN374 Class (and two additional lower levels (0 – 5 min) that might be useful when selecting gloves for work operations of very short duration).

Breakthrough time EN.png

FURTHER GUIDANCE

For complex cases, for us to be able to recommend gloves for chemical protection, we need to know:

  • What chemicals are handled? Please attach their Safety Data Sheets (SDS).
  • How are these chemicals handled? Please describe the work operations, duration and level of expected exposure.

Send the fill-in the Excel sheet + SDS to cs.support@ejendals.com

EXPLORE OUR RANGE OF CHEMICAL PROTECTION GLOVES

See all Chemical gloves

CONTACT US

Contact one of our sellers and get help in finding a suitable glove for protection against the relevant chemical mix.

To contacs

WARRANTY LIMITATIONS AND DISCLAIMER USE

This information is provided solely as a convenience to help you evaluate our gloves in the end-users particular application. The information provided reflects performance of glove materials under carefully controlled conditions. Ejendals AB assumes no obligation or liability in connection with glove guidance information. It is the responsibility of the purchaser and/or user to determine the level of toxicity of the materials to be handled and to select the proper glove suitable for a particular application.

About cookies on this website

This website uses cookies to improve your experience, for you to be able to share material on social media and for us to be able to measure the traffic on the website and display customized ads based on your surfing habits. By clicking on I ACCEPT, you agree that Ejendals and their partners use cookies. If you want to know more or if you want to change your cookie settings, you can go to the cookie policy at any time.